Mechatronics and Instrumentation Laboratory, IIT Indore

Mechatronics and Instrumentation Laboratory

Department of Mechanical Engineering

International Journal publication

    2024
  1. Comprehensive study of microstructure, phase transformations, and mechanical properties of nitinol alloys made of shape memory and superelastic wires and a novel approach to manufacture Belleville spring using wire arc additive manufacturing, Ajit Kumar, Iyamperumal Anand Palani, Muralidhar Yadav, Materials Today Communications,03/01/2024, 2024
  2. Compositional influence of CuAlMn SMA coated optical fiber towards sensing low temperature, Nandini Patra, Subramaniam R Geetha, Ch Harish, Navneet Chouhan, Vipul Singh, IA Palani, Sensors and Actuators A: Physical,02/01/2024,2024
  3. Wire arc additive manufacturing of NiTi 4D structures: influence of interlayer delay,Shalini Singh, Iyamperumal Anand Palani, Christ Prakash Paul, Alexander Funk, Prashanth Konda Gokuldoss, 3D Printing and additive manufacturing, 02/01/2024, 2024
  4. Mechanical Properties, Microstructure, and Actuation Behavior of Wire Arc Additive Manufactured Nitinol: Titanium Bimetallic Structures, Shalini Singh, Elena Demidova, Natalia Resnina, Sergey Belyaev, IA Palani, CP Paul, Ajit Kumar, KG Prashanth,3D Printing and additive manufacturing, 02/01/2024,2024
    5. 2023
  5. Influence of Substrate Temperature on Structure and Functional Properties of NiTi Walls Produced by WAAM, Natalia Resnina, Iyamperumal Anand Palani, Sergey Belyaev, Rashid Bikbaev, Irina Ponikarova, Thangamani Geethapriyan, Maria Starodubova, Transactions of the Indian Institute of Metals,29/12/2023, 2023
  6. Influence of the interlayer temperature on structure and properties of CMT wire arc additive manufactured NiTi structures, Shalini Singh, IA Palani, Shirin Dehgahi, CP Paul, KG Prashanth, AJ Qureshi, Journal of Alloys and Compounds,12/05/2023, 2023
  7. Parametric Investigation on laser annealing of polyimide on improving the characteristics of NiTi SMA-based bimorph towards the development of microactuators, Kaushal Gangwar, Dhruv Gupta, Palani Iyamperumal Anand, Sensors and Actuators A: Physical,01/10/2023,2023
  8. Post-processing of Wire Arc Additive Manufactured Stainless Steel 308L to Enhance Compression and Corrosion Behavior using Laser Shock Peening Process,Thangamani Geethapriyan, IA Palani, Mayank K Singh, Dhirendra K Rai, VG Shanmuga Priyan, S Kanmani Subbu, Journal of Materials Engineering and Performance,25/08/2023, 2023
  9. Investigation of laser-textured triboelectric nanogenerator for vibration sensing of machine tools, PS Kaushik, Puneet Gupta, J Diksha, Ashwani S Tripathi, Suhas S Joshi, IA Palani,14/07/2023,2023
  10. Bio-inspired soft jellyfish robot: A novel polyimide-based structure actuated by shape memory alloy, M Muralidharan, Parvesh Saini, Preshit Ameta, IA Palani, International Journal of Intelligent Robotics and Applications,08/07/2023, 2023
  11. Development of Cu-based shape memory alloy through selective laser melting from elemental powder mixture: Processing and characterization, Shalini Singh, IA Palani, Shirin Dehgahi, AJ Qureshi, AN Jinoop, CP Paul, KG Prashanth, Journal of Alloys and Compounds,17/06/2023, 2023
  12. Biocompatibility and Mechanical Behaviour Studies on Wire-Arc Additive Manufactured Stainless Steel 316L and Shape Memory Alloy (NiTi) Materials for Biomedical Implants, Jhasketan Badhai, Sibi Karthik, Avinash Sonawane, IA Palani, International Manufacturing Science and Engineering Conference, 2023
  13. Influence of Silver-Coated Tool Electrode on Electrochemical Micromachining of Incoloy 825, Geethapriyan Thangamani, Muthuramalingam Thangaraj, Palani Iyamperumal Anand, Mani Jayakumar, Nikolaos E Karkalos, Emmanouil L Papazoglou, Panagiotis Karmiris-Obratanski,Coatings,MDPI,21/05/2023, 2023
  14. Laser Induced Forward Transfer-Based Micro-3D Printing of NiTi alloy, A sahu, P Karna, V singh, IA Palani, Advances in Additive Manufacturing and Metal Joining: Proceedings of AIMTDR 2021, 2023
  15. Frequency Response Characterization of Thin-Film Shape Memory Alloy Actuator for Reconfigurable Antenna, M Geetha, K Dhanalakshmi, V Vetriselvi, S Jayachandran, IA Palani,Journal of Electronic Materials, 2023
  16. Sensorless control of CuAlNi/KAPTON bimorph actuator, V Vetriselvi, K Dhanalakshmi, M Geetha, IA Palani, JOURNAL OF VIBRATION AND CONTROL, 2023
  17. Wire arc additive manufacturing of commercially pure titanium bio-medical alloy, Poonam S Deshmukh, Abhinav Katiyar, Anshu Sahu, Dan Sathiaraj, IA Palani, Avinash Sonawane, Materials Today: Proceedings, 2023
  18. Solid-State Welding of Nitinol Shape Memory Alloys: A Review, SS Mani Prabu, S Aravindan, S Ghosh, IA Palani,Materials Today Communications, 2023
  19. The Enhancement of Gear Quality through the Abrasive Flow Finishing Process, Anand Petare, Neelesh Kumar Jain, IA Palani,Cambridge Scholars Publishing, 2023
  20. Green synthesis of biocompatible superparamagnetic iron oxide-gold composite nanoparticles for magnetic resonance imaging, hyperthermia and photothermal therapeutic applications, Prashant Kharey, Manish Goel, Zakir Husain, Ruby Gupta, Deepika Sharma, M Manikandan, IA Palani, Sharad Gupta, Materials Chemistry and Physics, 2023
    21. 2022
  21. Parametric investigation on laser interaction with polyimide for graphene synthesis towards flexible devices, Arpit Kumar Singh, Sooraj Shiby, Anshu Sahu, Piyush Pachori, Manushree Tanwar, Rajesh Kumar, IA Palani, Journal of Physics D: Applied Physics,2022
  22. Investigations on the actuation behaviour of friction stir welded nickel titanium shape memory alloy using continuous fibre laser, SS Mani Prabu, IA Palani,Journal of Micromanufacturing,2022
  23. Microstructure and mechanical properties of dissimilar laser welding of NiTi to copper, Vivek Kumar, Pradyumn Kumar Arya, IA Palani, Yuvraj Kumar Madhukar, Dan Sathiaraj, Vinay Kumar Patel, Advances in Materials and Processing Technologies,2022
  24. Investigation on Actuation Performance of Shape Memory Alloy Actuator for Robotics Application, Shanthi Jayachandran, Neelam Yashwanth, Hampa Faazil Hussain, IA Palani,Advances in Forming, Machining and Automation: Select Proceedings of AIMTDR,2022
  25. Enhancing the mechanical and Tribological properties of Al-Si-Cu-Ni-based cast Al alloy through minor zirconium addition, Achyuth Rao Kulkarni, IA Palani, M Jayaprakash, Journal of Materials Engineering and Performance,2022
  26. Parametric investigations on laser-induced forward transfer based micro-3D printing of NiTi alloy, Anshu Sahu, IA Palani, Vipul Singh, Materials and Manufacturing Processes, 2022
  27. Optimum strength and ductility of pure copper fabricated by Wire Arc additive Manufacturing, PS Deshmukh, K Tomar, GD Sathiaraj,Palani, Manufacturing Letters 33,24-28
  28. Wire Arc Additive Manufacturing of NiTi 4D Structures: Influence of Interlayer Delay, S Singh,Palani,CP Paul,A Funk,P Konda Gokuldoss,3D Printing and additive manufacturing,
  29. Influence of pre-strain on attributes of Ni-rich NiTi/Kapton Polyimide bimorph for flexible mirrors, Kaushal Gangwar,S Jayachandran,Anshu Sahu,Arpit Singh, Palani, Sensors and Actuators A: Physical, 341,2022
  30. Mechanical properties,Microstructures and Actuation behaviour of wire Arc Additive Manufactured NiTinol:Titanium Bimetallic structures, Shalini Singh, Elena Demidova,Natalia Resnina, Sergey Belyaev, S Jayachandran, N Resnina, S Belyaev, Palani,CP Paul,Ajit kumar,KG Prashanth,3D printing and Additive Manufacturing,2022
  31. Parametric investigations on Laser-Induced forward transfer based micro-3D printing of NiTi alloy, Anshu Sahu,Vipul Singh,Palani,Materials and Manufacturing Processes,2022
  32. Enhancing the Mechanical and Tribological Properties of Al-Si-Cu-Ni-Based Cast Al alloy through Minor Zirconium Addition, Achyuth Rao Kulkarni,Palani,M Jayaprakash,Journal of Materials Engineering and Performance,2022
  33. invsetigation on fabrication of NiTi based strain gauge using laser decal transfer based micro-3D printing, Anshu Sahu,I A Palani,Vipul Singh,Manufacturing Letters 32,49-53
  34. Functional Properties of the Multilayer NiTi Alloy produced by Wire Arc Additive Manufacturing, N Resnina,Palani,S Belyaev,Shalini Singh,Ajit Kumar, R Bikbaev,Anshu Sahu, Shape Memory and Superelasticity,2022
  35. Laser Hybrid Wire Arc Additive Manufacturing for Fabricating Thin Sections, Shalini Singh,AN Jinoop,GTAV Kumar, Ashish Shukla,Palani, N Resnina,CP Paul,KG Prashanth,Transactions of the Indian National Academy of Engineering,175,2022
    36. 2021
  36. Investigations on laser actuation and life cycle characteristics of NiTi shape memory alloy bimorph for non-contact functional applications, Pravin Karna, SS Mani Prabu, SC Karthikeyan, R Mithun, S Jayachandran, N Resnina, S Belyaev, Palani, Sensors and Actuators A: Physical, 321, 112411,2021
  37. Kulkarni Achyuth Rao, M Manikandan, Ashish Kumar Shukla, Shanmugham Subramaniam, VP Balaji, Palani, M Jayaprakash, Influence of laser-nitriding on mechanical and elevated temperature fretting wear behavior of A356-alloy, Surface and Coatings Technology,127072,2021/3/16
  38. M Muralidharan, Palani, Development of Subcarangiform Bionic Robotic Fish Propelled by Shape Memory Alloy Actuators,Defence Science Journal,71,2021.
  39. M Muralidharan, K Aishwarya, R Mithun, Palani, Thermo-mechanical behaviour of sma wire embedded pdms actuator towards soft robotics applications, International Journal of Robotics and Automation,36,2021
  40. N Resnina, Palani, S Belyaev, SS Mani Prabu, P Liulchak, U Karaseva, M Manikandan, S Jayachandran, V Bryukhanova, Anshu Sahu, R Bikbaev, "Structure, martensitic transformations and mechanical behaviour of NiTi shape memory alloy produced by wire arc additive manufacturing" Journal of alloys and compounds, 851, 156851,2021
  41. Achyuth Rao Kulkarni, Ashish Kumar Shukla, SS Mani Prabu, Shanmugham Subramaniam, VP Balaji, Palani, M Jayaprakash, Investigations on enhancing the surface mechanical and tribological properties of A356 Al alloy using pulsed laser-assisted nitriding, Applied Surface Science, 2021

    42. 2020
  42. Laser texturing of helical and straight bevel gears to enhance finishing performance of AFF process, Anand Petare, Gaurav Deshwal, Palani, Neelesh Kumar Jain, The International Journal of Advanced Manufacturing Technology, 2020/9
  43. Thermo mechanical and Control Behaviour of Copper based Shape Memory Alloy Bimorph Actuator towards the Development of Micro Positioning System, M Muralidharan, S Jayachandran, M Yogeshwaran, AS Shivaani, Palani, Defence Science Journal, 2020/11/1
  44. Investigations on the influence of surface mechanical attrition treatment on the corrosion behaviour of friction stir welded NiTi shape memory alloy, SS Mani Prabu, Chandra S Perugu, Ashutosh Jangde, HC Madhu, M Manikandan, Manoj D Joshi, Santosh S Hosmani, P Ajay Kumar, Satish V Kailas, Palani, Surface and Coatings Technology, 2020/11/25
  45. Influence of quaternary alloying addition on transformation temperatures and shape memory properties of Cu–Al–Mn shape memory alloy coated optical fiber, S Karthick, Singh Shalini, SS Mani Prabu, Khan Suhel, Agarwal Vandan, Chitkariya Puneet, Saxena Manoj Kumar, R Venkatesh, Palani, Measurement, 2020/3/1.
  46. Studies on development of NiTi-integrated optical fiber sensor and its life cycle behavior, Shalini Singh, Karthick Subramaniam, Nishita Chittora, A Brolin, Palani, Journal of Intelligent Material Systems and Structures, 2020/2/17.
  47. Micro-channel fabrication on NiTi shape memory alloy substrate using Nd3+: YAG laser, Ashish K Shukla, Jitesh V Bhoyar, Mani Prabu SS, Sachin Laxman Bhirodkar, S Shiva, Palani,Jounral of Materilas and manufacturing processes, 35,3,2020.
  48. Development of Sn doped ZnO based ecofriendly piezoelectric nanogenerator for energy harvesting application, M Manikandan, Rajagopalan Pandey, Nandini Patra, Jayachandran Subbian, M Muralidharan, Mani Prabu SS, Palani, Vipul Singh, NanoTechnology, 2020/1/14
  49. Elucidations on the Effect of Lanthanum Doping in ZnO Towards Enhanced Performance Nanogenerators, Pandey Rajagopalan, Pramila Jakhar, Palani, Vipul Singh, Sang Jae Kim, International Journal of Precision Engineering and Manufacturing-Green Technology,7,1,2020.

    50. 2019
  50. Investigations on performance viability of NiTi, NiTiCu, CuAlNi and CuAlNiMn shape memory alloy/Kapton composite thin film for actuator application, S Jayachandran, K Akash, SS Mani Prabu, M Manikandan, M Muralidharan, A Brolin, Palani, Composite Part B: Engineering, 176,10782, 2019.
  51. Development of reliable and high responsivity ZnO based UV-C photodetector, Jitesh Agrawal, Tejendra Dixit, Palani, Vipul Singh, IEEE Journal of Quantum Electronics, 2019/12/4
  52. Exploring the functional and corrosion behavior of friction stir welded NiTi shape memory alloy, SS Mani Prabu, Chandra S Perugu, HC Madhu, Ashutosh Jangde, Sohel Khan, S Jayachandran, M Manikandan, P Ajay Kumar, Satish V Kailas, Palani, Journal of Manufacturing Processes, 47,119, 2019.
  53. Green synthesis of near-infrared absorbing eugenate capped iron oxide nanoparticles for photothermal application, Prashant Kharey, Surjendu Bikash Dutta, M Manikandan, Palani, SK Majumder, Sharad Gupta, Nanotechnology, 31,9,2019.
  54. Exploring the functional capabilities of NiTi shape memory alloy thin films deposited using electron beam evaporation technique, S Jayachandran, SS Mani Prabu, M Manikandan, M Muralidharan, M Harivishanth, K Akash, Palani, Vaccum, 168, 108826, 2019.
  55. Selective area laser-assisted doping of SiC thin films and blue light electroluminescence, Emmanuel Paneerselvam, Toshifumi Kikuchi, Hiroshi Ikenoue, Nilesh J Vasa, Palani, Mitsuhiro Higashihata, Daisuke Nakamura, MS Ramachandra Rao, Journal of Physics D: Applied Physics, 52, 48, 2019.
  56. Electron Depleted ZnO Nanowalls-Based Broadband Photodetector, Jitesh Agrawal, Tejendra Dixit, Palani, Vipul Singh, IEEE Photonics Technology Letters, 31, 20, 2019.
  57. Post-processing of laser additive manufactured Inconel 718 using laser shock peening, AN Jinoop, S Kanmani Subbu, CP Paul, Palani, International Journal of Precision Engineering and Manufacturing, 20,9,2019.
  58. Development of Al Doped ZnO Nanowalls Based Flexible, Ultralow Voltage UV Photodetector, Jitesh Agrawal, Tejendra Dixit, Palani, Vipul Singh, IEEE Sensors Letters, 3,9,2019.
  59. Pareto optimization of WEDM process parameters for machining a NiTi shape memory alloy using a combined approach of RSM and heat transfer search algorithm, Rakesh Chaudhari, Jay J Vora, SS Mani Prabu, Palani, Vivek K Patel, DM Parikh, Advances in manufacturing, 2019/8/20.
  60. A Comparative Analysis of ZnO Nanorods and Nanopencils Towards Amperometric Biosensing Applications, Journal of nanoscience and nanotechnology, Mayoorika Shukla, Palani, Vipul Singh, 19,7,2019.
  61. Systematic investigations on the effect of prolong UV illumination on optoelectronic properties of ZnO honeycomb nanostructures, Jitesh Agrawal, Tejendra Dixit, Palani, Vipul Singh, Scripta Materialia, 2019.
  62. Study of laser texturing assisted abrasive flow finishing for enhancing surface quality and microgeometry of spur gears, Anand C Petare, Ankit Mishra, Palani, NK Jain, The International Journal of Advanced Manufacturing Technology,101,785,2019.
  63. Thermo-mechanical behavior of shape memory alloy spring actuated using novel scanning technique powered by ytterbium doped continuous fiber laser, SS Mani Prabu, R Mithun, M Muralidharan, Tameshwer Nath, A Brolin, K Akash, Palani, Smart Materials and Structures, 28, 4, 2019.
  64. Shape memory effect, temperature distribution and mechanical properties of friction stir welded nitinol, SS Mani Prabu, HC Madhu, Chandra S Perugu, K Akash, R Mithun, P Ajay Kumar, Satish V Kailas, Manivannan Anbarasu, Palani, Journal of Alloys and Compounds,776, 2019/3/5
  65. Multi-response optimization of wedm process parameters for machining of superelastic nitinol shape-memory alloy using a heat-transfer search algorithm, Rakesh Chaudhari, Jay J Vora, SS Mani Prabu, Palani, Vivek K Patel, DM Parikh, Luis Norberto López de Lacalle, Materials, 12,8,2019
  66. Superior response in ZnO nanogenerator via interfaced heterojunction for novel smart gas purging system, Pandey Rajagopalan, Vipul Singh, Palani, Sang-Jae Kim, Extreme Mechanics Letters, 26,18-25, 2019.
  67. A La-doped ZnO ultra-flexible flutter-piezoelectric nanogenerator for energy harvesting and sensing applications: a novel renewable source of energy, Rajagopalan Pandey, Gaurav Khandelwal, Iyamperumal Anand Palani, Vipul Singh, Sang-Jae Kim, Nanoscale, 29,11,2019
  68. Investigations on the surface plasmonic effect of pulsed laser dispersed (PLDi) NiTi and CuAl alloy nanoparticles on hydrothermally grown ZnO nanorods, Nandini Patra, Vipul Singh, Palani, Material Research Express, 2019/1/16
  69. Influence of Ni, Ti and NiTi alloy nanoparticles on hydrothermally grown ZnO nanowires for photoluminescence enhancement, N Patra, SK Karuturi, NJ Vasa, D Nakamura, M Higashihata, V Singh,I.A.Palani, Journal of Alloys and Compounds 770, 1119-1129

    70. 2018
  70. Insights into non-noble metal based nanophotonics: exploration of Cr-coated ZnO nanorods for optoelectronic applications, T Dixit, Palani, V Singh, RSC Advances 8 (13), 6820-6833, 2018.
  71. Study of laser texturing assisted abrasive flow finishing for enhancing surface quality and microgeometry of spur gears, AC Petare, A Mishra, Palani, NK Jain, The International Journal of Advanced Manufacturing Technology, 1-15,2018
  72. Optimal conceptual design and vision-based control of a fruit harvesting robot, KS Kumar, PSS Shankaran, SR Asif, S Karthick, Palani, BK Lad, A Patil, International Journal of Intelligent Machines and Robotics 1 (1), 45-59,2018
  73. Investigations on effect of laser-induced self-assembled patterning on optical properties of flexible polyimide substrates for solar cell applications, AK Shukla, VM Yadav, A Kumar, Palani, A Manivannan, Journal of Physics D: Applied Physics 51 (4), 045502,2018
  74. Enhancement of ZnO-based flexible nano generators via a sol–gel technique for sensing and energy harvesting applications, P Rajagopalan, V Singh, Palani, Nanotechnology 29 (10),2018 105406
  75. Investigations on actuation characteristics and life cycle behaviour of CuAlNiMn shape memory alloy bimorph towards flappers for aerial robots, K Akash, AK Jain, G Karmarkar, A Jadhav, DC Narayane, N Patra, I.A.Palani, Materials & Design 144, 64-71,2018.
  76. Laser annealing of laser additive–manufactured Ni-Ti structures: An experimental–numerical investigation S Shiva, Palani, CP Paul, B Singh,Proceedings of the Institution of Mechanical Engineers, Part B: Journal of engineering manufacture
  77. Fabrication of high responsivity deep UV photo-detector based on Na doped ZnO nanocolumns, J Agrawal, T Dixit, Palani, MSR Rao, V Singh, Journal of Physics D: Applied Physics 51 (18), 185106
  78. Laser-assisted dry, wet texturing and phase transformation of flexible polyethylene terephthalate substrate revealed by Raman and ultraviolet-visible spectroscopic studies AK Shukla, Palani, A Manivannan, Journal of Laser Applications 30 (2), 022008
  79. Facile hydrothermal synthesis of mn doped ZnO nanopencils for development of amperometric glucose biosensors, M Shukla, J Agrawal, T Dixit, Palani, V Singh Materials Research Express 5 (5), 055031,2018.
  80. Influence of dimple and spot-texturing of HSS cutting tool on machining of Ti-6Al-4V MS Sawant, NK Jain, Palani, Journal of Materials Processing Technology,2018.
  81. Investigation on thermo-mechanical behavior of SMA spring under the influence of different actuation medium T Nath, K Akash, P Chouhan, BK Lad, Palani Microsystem Technologies 24 (6), 2813-2821.
  82. Life cycle analysis of electrically actuated SMA spring using Talbot interferometry R Disawal, T Nath, S Prakash, Palani,, Applied optics 57 (20), 5779-5783.
  83. Shape memory effect, temperature distribution and mechanical properties of friction stirwelded nitinol, SS Mani Prabu, HC Madhu, Chandra S Perugu, K Akash, R Mithun, P Ajay Kumar, Satish V Kailas, Manivannan Anbarasu, Palani, Journal of Alloys and Compounds, 2018
  84. Enhancing the life cycle behaviour of Cu-Al-Ni shape memory alloy bimorph by Mn addition, K Akash, SS Mani Prabu, Tobias Gustmann, S Jayachandran, Simon Pauly, Palani, Materials Letters, 226,55-58,2018.
  85. Life cycle analysis of electrically actuated SMA spring using Talbot interferometry, Reena Disawal, Tameshwer Nath, Shashi Prakash, Palani, Journal of applied optics, 57,20,5779-5783, 2018
  86. Integrating GLL-Weibull Distribution Within a Bayesian Framework for Life Prediction of Shape Memory Alloy Spring Undergoing Thermo-mechanical Fatigue, Pradeep Kundu, Tameshwer Nath, Palani, Bhupesh K Lad,,27,7,2018.
  87. Investigation on thermo-mechanical behavior of SMA spring under the influence of different actuation medium, Tameshwer Nath, K Akash, Priya Chouhan, Bhupesh Kumar Lad, Palani, 24,6,2813-2821,2018.
  88. Laser annealing of laser additive–manufactured Ni-Ti structures: An experimental–numerical investigation, S Shiva, Palani, CP Paul, B Singh, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,232,6,2018.
  89. Investigations on actuation characteristics and life cycle behaviour of CuAlNiMn shape memory alloy bimorph towards flappers for aerial robots, K Akash, Akash K Jain, Gaurav Karmarkar, Aniket Jadhav, Dhiraj C Narayane, Nandini Patra, Palani, Materials and Design,144,64-71,2018

    90. 2017
  90. Ashish K Shukla, K Akash, Palani, Anbarasu Manivannan Laser assisted wet texturing of flexible polyethylene terephthalate substrate using Nd 3+: YAG laser for photovoltaics devices Materials Science and Engineering: B, 2017/12/31.
  91. Mayoorika Shukla, Tejendra Dixit, Rajiv Prakash, Palani, Vipul Singh Influence of aspect ratio and surface defect density on hydrothermally grown ZnO nanorods towards amperometric glucose biosensing applications Applied Surface Science2017/6/10.
  92. Ashish Kumar, Tejendra Dixit, Palani, D Nakamura, M Higashihata, Vipul Singh Utilization of surface plasmon resonance of Au/Pt nanoparticles for highly photosensitive ZnO nanorods network based plasmon field effect transistor Physica E: Low-dimensional Systems and Nanostructures, 2017/6/3.
  93. Roshan Sasi, S Kanmani Subbu, Palani, Performance of laser surface textured high speed steel cutting tool in machining of Al7075-T6 aerospace alloy, Surface and Coatings Technology, 2017.
  94. K Akash, Shukla Ashish, SS Mani Prabu, Dhiraj Chindhuji Narayane, S Kanmanisubbu, Palani” Parametric investigations to enhance the thermomechanical properties of CuAlNi shape memory alloy Bi-morph”, Journal of Alloys and Compounds, 2017.
  95. Mani Prabu S. S.; Madhu H.C.; Chandra S Perugu; Akash K.; Ajay Kumar P.; Satish V Kailas; Anbarasu Manivannan; Palani I. A., Microstructure, Mechanical Properties and Shape Memory Behaviour of Friction Stir Welded Nitinol,Material Science and Engineering A, ( Accepted 2017) [2.3].
  96. K Akash, MP SS, AK Shukla, T Nath, S Karthick, Palani ,Investigations on the life cycle behavior of Cu-Al-Ni/polyimide shape memory alloy bi-morph at varying substrate thickness and actuation conditions, Sensors and Actuators A: Physical 254, 28-35 [2.8]
  97. T Dixit, Palani, V Singh, Role of Surface Plasmon Decay Mediated Hot Carriers towards the Photoluminescence Tuning of Metal Coated ZnO Nanorods, The Journal of Physical Chemistry C, 2017 [4.5]
  98. S Pathak, NK Jain, Palani , Effect of applied voltage and electrolyte parameters on pitch, runout, flank topology, and finishing productivity of the straight bevel gears in PECH process, Materials and Manufacturing Processes 32 (3), 339-347, 2017.[1.8]
  99. T Nath, P Chouhan, R Disawal, Palani,Comparative analysis of electrical and hot water actuation of shape memory alloy spring using thermo-mechanical cycle test bench, Defence Science Journal 67 (1), 100-107

    100. 2016
  100. P. Rajgopalan, Vipul Singh and I. A. Palani, Investigations on the influence of substrate temperature in developing enhanced response ZnO nanogenerators on flexible polyimide using spray pyrolysis technique, Material Research Bulletin, 84, 340, 2016
  101. S Shiva, Palani, CP Paul, SK Mishra, B Singh, Investigations on phase transformation and mechanical characteristics of laser additive manufactured TiNiCu shape memory alloy structures, Journal of Materials Processing Technology,238,142-151, 2016
  102. S Shiva, Palani, SK Mishra, CP Paul, LM Kukreja, Influence of Cu Addition to Improve Shape Memory Properties in NiTi Alloys Developed by Laser Rapid Manufacturing, Journal of Laser Micro Nanoengineering 11 (2), 153,2016
  103. R Gagrani, N Patra, P Rajagopalan, V Singh, Palani,Influence of laser parameters in generating the NiTi nanoparticles with a rotating target using underwater solid state Nd: YAG laser ablation IOP Conference Series: Materials Science and Engineering 149 (1), 012034, 2016
  104. K Akash, R Chourasia, S Karthick, DK Meena, Palani, Investigations on the Influence of Substrate Temperature in Synthesizing CuZnAl Alloy Thin Films Using Spray Pyrolysis Advanced Science, Engineering and Medicine 8 (9), 722-729,2016
  105. P Chouhan, T Nath, BK Lad, Palani, Investigation on actuation and thermo-mechanical behaviour of Shape Memory Alloy spring using hot water,IOP Conference Series: Materials Science and Engineering 149 (1), 012147
  106. A Kumar, T Dixit, Palani, PR Sagdeo, V Singh, Phase Transformation and Optical Properties of Annealed Hydrothermally Synthesized ZnO/ZnCr2O4 Nanocomposites International Journal of Applied Ceramic Technology 13 (5), 912-919,2016
  107. P Rajagopalan, R Gagrani, D Nakamura, T Okada, V Singh, Palani, Parametric investigation of substrate temperatures on the properties of Zinc oxide deposited over a flexible polymeric substrate via spray technique, IOP Conference Series: Materials Science and Engineering 149 (1), 012069,2016
  108. A Bilgaiyan, T Dixit, G Kapil, SS Pandey, S Hayase, Palani, V Singh Effect of addition of KI on the hydrothermal growth of ZnO nanostructures towards hybrid optoelectronic device applications Journal of Nanoscience and Nanotechnology 16 (4), 3301-3306,2016, 2016
  109. T Dixit, A Bilgaiyan, Palani, V Singh, Influence of Parametric Variations on Hydrothermal Growth of ZnO Nanostructures for Hybrid Polymer/ZnO Based Photodetector, Journal of Nanoscience and Nanotechnology 16 (4), 3254-3261,2016
  110. S Pathak, NK Jain, Palani, Investigations on surface quality, surface integrity and specific energy consumption in finishing of straight bevel gears by PECH process, The International Journal of Advanced Manufacturing Technology 85 (9-12),2016
  111. S.Shiva, I.A.Palani, C.P.Paul and B.Singh, Laser annealing of laser additive manufactured NiTi structures:an experimental and numerical investigations,Proc Imech E Part-B, J Engineering Manufacture, 1-14,2016, DOI: 10.1177/0954405416661582
  112. Anubha Bilgaiyan, Tejendra Dixit, Palani, Vipul Singh, Performance Improvement of ZnO/P3HT hybrid UV photo-detector by interfacial Au nanolayer, Physica E: Low-dimensional Systems and Nanostructures, 2016/7/22
  113. A Kumar, K Bhargava, T Dixit, Palani, V Singh, Hydrothermally Processed Photosensitive Field-Effect Transistor Based on ZnO Nanorod Networks, Journal of Electronic Materials 45 (11), 5606-5611,2016.
  114. S Pathak, NK Jain, Palani, Effect of honing gear hardness on microgeometry and surface quality improvement of straight bevel gears in PECH process, The International Journal of Advanced Manufacturing Technology 85 (9-12), 2016
  115. S Pathak, NK Jain, Palani, Experimental investigations on redefining the surface quality of bevel gears by pulsed electrochemical honing, Transactions of the IMF 94 (2), 64-69, 2016
  116. T Dixit, M Shukla, Palani, V Singh, Insight of dipole surface plasmon mediated optoelectronic property tuning of ZnO thin films using Au, Optical Materials 62, 673-679,2016
  117. Tejendra Dixit, Palani, Vipul Singh, Hot holes behind the improvement in ultraviolet photoresponse of Au coated ZnO nanorods, Materials Letters, 2016/6/11
  118. N Patra, K Akash, S Shiva, R Gagrani, HSP Rao, VR Anirudh, Palani, Parametric investigations on the influence of nano-second Nd 3+: YAG Laser wavelength and fluence in Synthesizing NiTi Nano-particles using Liquid assisted Laser Ablation Technique, Applied Surface Science, Volume 366, 15 March 2016, Pages 104–111
  119. T Dixit, Palani, V Singh, Selective tuning of enhancement in near band edge emission in hydrothermally grown ZnO nanorods coated with gold Journal of Luminescence 170, 180-186
  120. T Dixit, A Kumar, Palani, V Singh, Surface-plasmon-mediated red and near infrared emission from Au-coated ZnO/ZnCr 2 O 4 nanocomposites, Scripta Materialia 114, 84-87
  121. A Kumar, T Dixit, Palani, V Singh, A Systematic Tuning of Structural and Optical Properties of Hydrothermally Grown ZnO Nanorods by Post Growth Thermal Annealing, Advanced Science, Engineering and Medicine 8 (1), 49-56

    122. 2015
  122. S Pathak, NK Jain, Palani Process performance comparison of ECH and PECH for quality enhancement of bevel gears Materials and Manufacturing Processes 30 (7), 836-841
  123. S Pathak, NK Jain, Palani, Effect of honing gear hardness on microgeometry and surface quality improvement of straight bevel gears in PECH process, Interntaional journal of advance manufacturing technology
  124. S Pathak, NK Jain, Palani On Surface Quality and Wear Resistance of Straight Bevel Gears Finished by Pulsed Electrochemical Honing Process, Int. J. Electrochem. Sci 10, 8869-8885
  125. T.Dixit, A Bilgaiyan, Palani, D Nakamura, T Okada, V Singh Influence of potassium permanganate on the anisotropic growth and enhanced UV emission of ZnO nanostructures using hydrothermal process for optoelectronic applications , Journal of Sol-Gel Science and Technology 75 (3), 693-702
  126. S Shiva, Palani, SK Mishra, CP Paul, LM Kukreja Investigations on the influence of composition in the development of Ni–Ti shape memory alloy using laser based additive manufacturing, Optics & Laser Technology, 2015 [Impact factor:1.7]
  127. A Bilgaiyan, T Dixit, Palani, V Singh, Improved Photoresponse of Hybrid ZnO/P3HT Bilayered Photodetector Obtained Through Oriented Growth of ZnO Nanorod Arrays and the Use of Hole Injection Layer, Journal of Electronic Materials, 1-7,2015
  128. T Nath, A Kasliwal, K Kulkarni, R Singh, R Khatri, G Raut, A Kumar,I.A.Palani, Investigation on the Laser Based Actuation of Single way Trained SMA Sheet and their Application for the Development of Micro Positioning Stage,Journal of Applied Mechanics and Materials 766, 427-431
  129. T Dixit, Palani, V Singh, Investigation on the influence of dichromate ion on the ZnO nano-dumbbells and ZnCr2O4 nano-walls,Journal of Materials Science: Materials in Electronics 26 (2), 821-829
  130. T Dixit, A Bilgaiyan, Palani, V Singh , Influence of Parametric Variations on Hydrothermal Growth of ZnO nanostructures for Hybrid Polymer/ ZnO based Photodetector Journal of Nanoscience and Nanotechnology,2015

    131. 2014
  131. S Pathak, NK Jain, Palani, Process Performance Comparison of ECH and PECH for Quality Enhancement of Bevel Gears Materials and Manufacturing Processes, 2014 [Impact factor:1.966]
  132. S Pathak, NK Jain, Palani, On Use of Pulsed-Electrochemical Honing to Improve Micro-Geometry of Bevel Gears Materials and Manufacturing Processes 29 (11-12), 1461-1469, 2014 [Impact factor:1.966]
  133. B.Venkataramesh, P.Emmanuel, N.J.Vasa, I.A.Palani, Influence of grit count and sintering temperature on pulsed laser deposition of SiC thin films, International Journal of Advance Manufacturing Technologies, Springer series, DOI 10.1007/s00170-014-5622-0, 30th March 2014. [Impact factor:1.966]

    134. 2013
  134. Palani, CP Paul, A review on laser assisted deposition andmicro-etching of silicon carbide (SiC) coating for MEMS device application, International Journal on Design and Manufacturing Technologies 7 (2)
  135. G.Amutha, I.A.Palani, N.J.Vasa, M.Singaperumal, T.Okada,” Investigations on nano- and pico-second laser based annealing combined texturing of amorphous silicon thin films for photovoltaic applications “Journal of Solid Mechanics and Materials Engineering Vol 7, 2013, 206-218. [Impact factor:1.966]

    136. 2012
  136. I.A.Palani, D. Nakamura, K. Okazaki, M. Highasiata, T. Okada, Structural and optical properties of SbAl co-doped ZnO nanowires synthesized using Nanoparticle Assisted Pulsed Laser Deposition (NAPLD) with Sb as catalyst Journal of Alloys and Compounds, Volume 527, 25 June 2012, Pg,112-116.

    137. Before Joining IIT Indore
  137. Palani, I. A. D, Nakamura, K.Okazaki, K.Sakai, Higashihata, M, T.Okada “Influence of Sb in synthesize of ZnO nanowire using sandwich type substrate in carbothermal evaporation method” Applied Surface Science Volume 258, Issue 8, 1 February 2012, Pages 3611-3616 [Impact factor:1.966]
  138. D Nakamura, K Okazaki, Palani, M Higashihata, T Okada Influence of Sb on a controlled-growth of aligned ZnO nanowires in nanoparticle-assisted pulsed-laser deposition, Applied Physics A 103 (4), 959-963 [Impact factor:1.531]
  139. I.A. Palani, . D, Nakamura, K.Okazaki, Higashihata, M, T.Okada “Influence of Sb as a catalyst in the growth of ZnO nano wires and nano sheets using Nanoparticle-Assisted Pulsed-Laser Deposition (NAPLD)” Material Science and Engineering B (Accepted, doi:10.1016/j.mseb.2011.09.017). [Impact factor:1.862]
  140. Palani, N.J.Vasa, M.Singaperumal, T.Okada Influence of laser wavelength and beam profile on Nd3+:YAG laser assisted formation of polycrystalline Si films”, Thin solid films (2010), Vol 518, pp 4071. [Impact factor:2.038],
  141. Palani, N.J.Vasa, M.Singaperumal, T.Okada “Investigation on laser-annealing and subsequent laser-nanotexturing of amorphous silicon (a-Si) films for photovoltaic application”, Journal of laser micro and Nano Engineering (2010),Vol 5, pp 150- 156. (Cited in Electronics News magazine August 2010 1ssue). [Impact factor:0.76]
  142. Palani , Nilesh.J.Vasa , M. Singaperumal “Crystallization and ablation in annealing of amorphous-Si thin-film on glass and crystalline-Si substrates irradiated by third harmonics of Nd3+:YAG laser”: International Journal of material Science in semiconductor processing (2008), Vol 11, pp 107-116. (Top 10 most downloadable paper) [Impact factor:1.761]
  143. Palani , N.J.Vasa, S.Kanmanisubbu, J.Ramkumar & M.Singaperumal “Laser based surface processing of engineering materials - state of art”: International Journal of design and manufacturing technologies ( July 2008), Vol 2, pp 1- 9
  144. N.J.Vasa, Palani, M.Singaperumal, T.Okada “Influence of Nd3+:YAG Laser Beam Profiles on Annealing and Nano-Texturing of Amorphous-Silicon Thin Films”, Transactions of the Materials Research Society of Japan (Accepted) . [Impact factor:0.75]
  145. N.J.Vasa, Palani, M.Singaperumal, T.Okada “Nd3+:YAG laser assisted doping and simultaneous texturization of amorphous Si film for a tandem photovoltaic cell” Journal of optics and precision Engineering , Vol.19, 9, pp. 2263-2270 [Impact factor:0.75]
  146. D. Nakamura, K. Okazaki, Palani, M. Higashihata, T. Okada ” Influence of Sb on a Controlled-growth of aligned ZnO nanowires in nanoparticle- assisted pulsed-laser deposition” Appl Phys A, DOI 10.1007/s00339-011-6401-5 A (2011) 103:959–963 [Impact factor:1.966]
  147. B. Cao; K.Sakai; D, Nakamura; Palani, I. A.; Gong, H. B.; Xu, H. Y.; Higashihata, M; T.Okada “Stimulated Optical Emission from ZnO Nanobelts Grown with a Simple Carbothermal Evaporation Method”, The Journal of Physical Chemistry Vol.115, pp.1702-1707,2011.01. [Impact factor:4.835]
  148. K.Okazaki, D.Nakamura, M.Higashihata, Palani, T.Okada ”Lasing characteristics of an optically pumped single ZnO nanosheet”, Optics Express, 19, 21,20389-20394 (2011). [Impact factor:3.525]
  149. Palani, D. Nakamura, K. Okazaki, T. Shimogaki, M. Higashihata, T. Okada” Influence of ZnO buffer layer on growth of Sb doped ZnO nano wires using nano particle assisted pulsed laser deposition (NAPLD) using Sb as catalyst”, Adv. Mat. Lett. 2012, 3(2), 66-70.

© 2023 - All Rights with Mechatronics and Instrumentation Laboratory, IIT Indore